翻转课堂融入线上教学的应用探索——以“Photoshop图像处理”课程为例

在新的教学环境下,开展翻转课堂教学面临着巨大的挑战。结合教学实践,分析实施翻转课堂教学存在的问题,在教学设计、教学形式和教学评价等方面提出相应的对策。大部分学生对翻转课堂内容及形式总体满意,但课程设计方面存在一些不足,需在教学实践中不断完善。     

Modeling irregular small bodies gravity field via extreme learning machines and Bayesian optimization

Close proximity operations around small bodies are extremely challenging due to their uncertain dynamical environment. Autonomous guidance and navigation around small bodies require fast and accurate modeling of the gravitational field for potential on-board computation. In this paper, we investigate a model-based, data-driven approach to compute and predict the gravitational acceleration around irregular small bodies. More specifically, we employ Extreme Learning Machine (ELM) theories to design, train and validate Single-Layer Feedforward Networks (SLFN) capable of learning the relationship between the spacecraft position and the gravitational acceleration. ELM-base neural networks are trained without iterative tuning therefore dramatically reducing the training time. Analysis of performance in constant density models for asteroid 25143 Itokawa and comet 67/P Churyumov-Gerasimenko show that ELM-based SLFN are able learn the desired functional relationship both globally and in selected localized areas near the surface. The latter results in a robust neural algorithm for on-board, real-time calculation of the gravity field needed for guidance and control in close-proximity operations near the asteroid surface.     

Empirical model of the high-latitude boundary of the Earth’s outer radiation belt at altitudes of up to 1000 km

An empirical model of the high-latitude boundary of the outer Earth’s radiation belt (ERB) has been presented, which is based on the measurement data of electron fluxes on the polar low-orbit CORONAS-Photon, Meteor-M1, and Meteor-M2 satellites. The boundary was determined by a sharp decrease to the background level of the flux of trapped electrons with energies of 100 or 200 keV in the polar part of the profile of the outer radiation belt. A numerical algorithm has been implemented to determine the time moment, when the fastest flux changes are recorded. The primary search was carried out, first, on 30 s averaged data, then repeated on data with a higher resolution. A functional dependence was obtained in order to approximate the obtained set of intersections of the boundary by elliptical curve. The empirical model constructed using the CORONAS-Photon measurement data in the epoch of anomalously low geomagnetic activity reflects the longitude structure of the high-latitude boundary of the outer radiation belt associated with the internal Earth’s magnetic field (MF), as well as its dependence on the universal time. Based on the data of intersections of the high-latitude boundary of the outer ERB (OERB) in the epoch of 2014–2016, the latitudinal shift of the boundary to the equator dependent on geomagnetic activity has been determined, as well as the nightside shift of the boundary due to the diurnal rotation of the Earth.     

C/C复合材料喷管烧蚀壁面退移流固耦合仿真研究

为了保障固体火箭发动机C/C喷管的可靠性,建立了一套正确反映发动机喷管烧蚀过程的流固耦合计算模型,以实现对喷管烧蚀率的高精度预估。依据热化学烧蚀理论以及喷管内燃气与喷管结构体界面的质量平衡和能量平衡关系,建立并验证了考虑壁面退移的C/C喷管流固耦合方法,实现了燃气流动、异相化学反应、结构体传热三者间的耦合。通过实验发动机喷管的烧蚀计算,论证了模型的正确性,并分析了不同金属铝含量对烧蚀率的影响,计算所得的烧蚀率与实验值最大相对误差为4.3%,与不考虑壁面退移的耦合算法计算结果对比,计算精度最高可提升46%。计算结果表明：C/C喷管在喉部附近烧蚀最为严重;推进剂中Al含量的增加导致燃气中氧化组分浓度降低,进而减少了烧蚀速率,这些结论与C/C喷管烧蚀相关研究结果一致。     

航空发动机两级反向旋流燃烧室燃烧流场大涡模拟研究

为深入了解真实航空发动机内燃烧流场,采用动态亚网格模型结合单步快速化学反应(FC)、火焰面(FLM)及反应进度变量(FPV)等三种燃烧模型对径向两级反向旋流燃烧室单头部构型进行了大涡模拟。为避免模型简化误差,对燃烧室包括全部气膜冷却孔在内的精细结构进行了完全仿真。在已达到统计定常状态的冷态流场基础上首先模拟了燃料喷注和掺混过程,约2.6ms后燃料到达真实的点火位置,随后采用FPV模型在半径3mm的球形区域数值模拟了点火,展示了在主燃孔横向射流作用下初始火焰沿化学恰当比混合分数等值线传播并充满整个火焰筒的发展过程,结果显示火焰到达燃烧室出口的耗时约为6～7ms。不同模型算法预测的平均温度场与CARS测量结果作了对比,LES-FPV,RANS-FPV,LES-FLM以及参考文献中RANS-FLM计算平均误差分别为3.47%,4.17%,7.76%和11.22%,表明LES改进了模拟精度,且FPV模型显著优于FLM模型。RANS-FPV预测的出口存在严重热斑,导致其给出的出口温度分布因子(OTDF)及最大径向温度分布因子(RTDF)值分别达到0.593和0.313;LES-FPV结果均匀性最好,其预测值分别为0.284和0.193。     

叶轮行波振动下的气动阻尼计算

为展开运动边界下离心叶轮流场的数值分析,独立开发了网格变形程序和非定常流动模拟程序,实现了流场中振动离心叶轮的气动阻尼计算。采用紧支径向基函数法进行结构到气动表面变形的数据传递,应用二叉树技术进行壁面距离的计算,大幅提高了网格变形和流场分析中距离搜索的计算效率。通过振动叶栅和径向叶轮的算例,验证了程序应用于运动边界流场计算和叶轮流场模拟的正确性。以半开式叶轮为对象,展开其在行波振动条件下气动阻尼的计算分析。结果表明,叶轮在前、后行波振动下的气动阻尼均为正,后行波振动引起的气动推力和气动阻尼较大,叶轮表面的平均气动功率密度呈现循环对称的分布特征。     

飞翼无人机3种保形进气口进气道气动与隐身综合特性对比

基于飞翼布局无人机隐身与结构装载布置要求,保形设计了3种进气口形状的背负式S弯进气道,按照进口投影截面形状上、下底之比顺序排列,分别为三角形、梯形和矩形.利用数值模拟方法对无人机内外流场耦合流动进行计算分析,且基于射线弹跳(SBR)法对进气道电磁散射特性进行仿真研究,获得了飞翼无人机3种进气道的气动与隐身综合特性.研究结果表明:①矩形进气道模型升阻和纵向力矩特性表现均最好;②3种 进气道模型按顺序排列总压恢复系数逐渐增大,畸变指数逐渐减小,进气道沿程气流也逐渐顺畅,矩形进气道模型进气道内流特性最优;③0°迎角下3种进气道模型雷达散射截面(RCS)均值基本呈现先增大后减小的特征,进气道终端开放时矩形进气道模型隐身性能最好,而终端短路时三角形进气道模型隐身效果更优异.      

战术导弹结构动力学灵敏度分析研究

研究了战术导弹的结构动力学频率灵敏度、振型灵敏度分析技术。首先,给出了结构模态灵敏度分析的理论和计算公式。然后,给出了某型导弹的结构动力学分析有限元模型。最后,分析了战术导弹各连接面刚度对全弹振动频率和振型的灵敏度。研究发现处于结构振型波峰或者波谷的中部连接面的刚度对全弹模态影响较大。该方法为模型修正和结构设计提供了参考。     

Comprehensive data reduction package for the Immersion GRating INfrared Spectrograph: IGRINS

We present a Python-based data reduction pipeline package (PLP) for the Immersion GRating INfrared Spectrograph (IGRINS), an instrument that covers the complete H- and K-bands in one exposure with a spectral resolving power of 40,000. The reduction steps carried out by the PLP include flat-fielding, background removal, order extraction, distortion correction, wavelength calibration, and telluric correction using spectra of A type standard stars. As the spectrograph has no moving parts, the PLP automatically reduces the data using predefined functions for the processes of order extraction, distortion correction, and wavelength calibration. Before the telluric correction of the target spectra, the intrinsic hydrogen absorption features of the standard A star are removed with a Gaussian fitting algorithm. The final result is the flux of the target as a function of wavelength. Users can customize the predefined functions for the extraction of the spectrum from the echellogram and adjust the parameters for the fitting functions for the spectra of celestial objects, using “fine-tuning” options, as necessary. Presently, the PLP produces the best results for point-source targets.